Belts & Hoses - Warning Signs

Car Care
Tips

Don't let these belt and hose warning signs go unnoticed

While belts and hoses might not be the the most commonly known car part, if something goes wrong with them, your engine won't run. These parts often don't offer direct signs that something is wrong, so it's important to perform visual checks, listen for unusual sounds, and have your belts and hoses inspected at the manufacturer's suggested service intervals. If you notice any of these symptoms, bring your car to Coggin DeLand Honda where our professional service technicians can properly diagnose your vehicle and get you back on the road safely.

Hoses:

There are many types of hoses that your vehicle's engine needs to run properly.

Top radiator hose:
carries engine coolant to the radiator for temperature reduction of coolant

Bottom radiator hose:
returns the cooled fluid to the water pump and throughout the engine

Bypass hose:
carries cold fluid from the water pump past the thermostat for faster engine warm-up and helps maintain constant engine temperature

Heater hose:
circulates hot coolant to and from the passenger compartment heating system

Look for:
broken or cracked hoses, lost or hardened flexibility, swollen or bulged hoses, or signs of leaks are present.

Belts:

V-Belts or Serpentine Belt:
Your car's accessories are controlled by either a series of v-belts, or one serpentine belt that winds around your engine. These belts power your alternator, water pump, power steering and cooling fans, so if a belt were to degrade and snap, it would mean a breakdown and costly repairs.

Look for:
cracks or splits in the belts; greasy or glazed look; excessive cracks; splits or chunking; or if the belt is exhibiting edge damage and/or wear.

Listen for:
signs of impending belt failure including a squealing noise when the car accelerates. This could mean the belt is slipping and not efficiently turning the drive accessories. The belt tensioner also could be worn and in need of immediate replacement.

Timing Belts:

The timing belt in your car's engine is a ribbed or toothed belt that is the sole component that keeps the camshaft(s) and crankshaft in sync. A failed timing belt can cause extensive and expensive engine damage, that's why it's important to replace it at OE scheduled intervals. Similar to other belts, your timing belt will degrade with time and usage.

Look for:
worn or sheared teeth; worn lands between the teeth; the back of the belt is cracked or worn; a damaged or worn edge; difficulty starting your car; and grease or oil contamination.

Listen for:
a high pitched shrieking or whirring sound, especially when the engine starts. This noise may also be heard while the engine is idling.

Belt Tensioners:

A belt tensioner is a pulley that maintains the constant belt tension and torque required to drive a vehicle's multiple accessories. It's imperative to ensure these belts are doing their job and keeping the belts they support in the proper place to prevent more damage to your engine.

Look for:
A belt tensioner is a pulley that maintains the constant belt tension and torque required to drive a vehicle's multiple accessories. It's imperative to ensure these belts are doing their job and keeping the belts they support in the proper place to prevent more damage to your engine.

Listen for:
A squealing or rattling coming from the timing cover area


[honda]